24+ Tool To Remove Staples From Hardwood Floors

Step 3: You may notice that there are some staples and nails stuck in the ground from where the hardwood floor was secured to the ground. Getting this out can be a bigger hassle than the hardwood floorboards themselves! However as you made sure to prepare beforehand, you can use the nail claw or the curved vice grips to get them out. There is a far faster, far easier way to remove hardwood flooring that allows one to recover nearly 90% of the floorboards in perfectly re-installable condition with no need to remove nails or staples from either the substrate or the recovered floorboards It is a shame that the beautiful wood from the floor was destroyed and promoted in the article as “the easiest, fastest way”

The best tool for removing staples from upholstery. Long

Staples And Padding. Again, for those with hardwood underneath, hopefully your padding is not attached with thousands of staples. This will depend on the original installer as some will load a bunch of 'em into the floor. To remove staples, needle nose pliers work well.

Tool to remove staples from hardwood floors. Although many nails and staples can be removed with your nail puller, some nails and staples may be broken, and vice grips will allow you to grab ahold of the broken nails and staples to remove them. Lastly, if you want to make your hardwood floor removal faster and easier, we suggest having a circular saw on hand. Please HELP! I am pulling up old carpet and would like to polish the 100 year old boards. The underlay is stapled in about 1000+ places. Every staple I try to remove with pliers keeps breaking and I cannot get the staple out. Is there a better way? Better tool? Will staple bits left behind be a problem when sanding? Thanks, any advice appreciated. The new Arrow Staple Lifter is a handy, must-have tool for removing staples quickly, cleanly and safely. The hardened steel body stands up to even the toughest staples while the lightweight ergonomic handle provides a comfortable grip for confident handling.

What is the safest way for me to remove the staples without causing damage to the floor? Thanks! Answer: Dear Kim. I use a Lee Valley’s restorer’s cat’s paw at www.leevalley.com (prod. # 60K21.06). It will get under most of the staples and with it’s large surface prying against the wood, with care it shouldn’t harm the wood. Most wood floors are secured with nails, so along with your pieces of wood, you’ll have a lot of metal debris to collect. How to Remove Nails from Hardwood Planks. If you are left with nails or staples in the subfloor, now is the time to grab your nail claw tool and get to work. Nov 12, 2013 - How to Remove Carpet Staples from Wood Floors

I've used a pair of bent nose pliers to remove thousands of nails and staples from hardwood floors. Just make sure the bend isn't too acute and that it's a beefy pair or you'll snap it. The pictured pliers I've had for probably 20 years. Having experience with pulling staples I can see the tool works very well. No matter how you look at it theres still going to be the occasional staple where one side of the staple pulls easier then the other side and doesn’t fully pull from the floor, but considering how fast it works its alot better then the alternative, Ive got time to go back and pull the few straglers with a pliers. Here is a before and after of why it is so worth your time to remove staples and uncover hardwood. Plus, after removing the carpet in several homes, it was time to build a master supply list. Check out our 10 Favorite Carpet Removal Tools , and start building your carpet-removal kit.

This heavy-duty tool speeds removal of staples in underlayments or in carpets stapled close to the wall. Constructed of aluminum, with steel staple hook. Skip to the end of the images gallery How To Remove Hardwood Flooring. First, set the blade depth on your circular saw. Our flooring is about 3/4 inches thick, so I set the blade depth about 3/4 inches deep, so that the blade cut through the hardwood floors, without cutting into the plywood subfloor. Flooring installers don't use a cat's paw to remove staples after old carpet has been removed -- there are just too many of them. Instead, they've developed a smart, efficient way to remove staples with a shovel or long-handled floor scraper. Hold the tool at about a 45-degree angle and slide it forcefully along the floor.

Holy crap, why on EARTH would anyone put that many staples in that plywood! I bet that is frustrating, back-breaking work. With that said, I do think it is worth it. I love wood floors and truly, I love those that look a little roughshod much better than glossy, shiny hardwood floors. This tool will get under any staples, that are tight against the floor. Just twist the handle, while prying up, to remove staples. Removal is fast and effortless, compared to using a flat screwdriver and pliers. For broken and 1/4 staples, use a Channel-lock nipper, to remove the staples. Clamp on the staples and roll, to remove staples. 1. Determine the direction of the tongue-and-groove hardwood installation so you can reverse the process as you remove hardwood flooring. Pull up heat vents to expose the cut edge of the flooring.

How to remove staples from Hardwood Floors! I've done lots of home improvement projects, but only on a beginner level, so I still have a TON of things to learn and re-learn with each new project. With this flooring project I knew how to remove the plywood sub-floor and linoleum, but I did not consciously anticipate the sub-floor leaving behind. The sellers for our future home thought it wise to remove the carpet prior to selling to demonstrate that there are hardwood floors through a chunk of the house. They ripped the carpet up, but they left the tacks and staples. Hundreds of tacks. Thousands of tacks. Millions and billions and trillions of tacks. So I’m exaggerating (slightly). Once you have all of the tack strips up, it is time to remove any staples on the floor from the carpet pad. I love using the “wonder tool” and these pliers for this job. A lot of times, I can just use the pliers to get the staples up, but some staples are so close to the floor, that I need to use the “wonder tool” to get them started.

Hardwood flooring makes a welcome addition to any home, but it can be daunting to deal with once it’s time to remove or replace it. Stripping hardwood flooring the wrong way can cost you hours of backbreaking work, leave you with an enormous mess and even cause permanent damage to your subflooring. The kitchen floors had several layers of vinyl, then 1/4" plywood stapled to the hardwoods below. We would like to refinish and use the original hardwood floors, but there are approximately 1.2 million staples that are proving to be impossible to remove. How to Remove 3/4-inch Hardwood Flooring. Although a properly maintained traditional hardwood floor can last for generations, it may need replacement due to water damage, neglect, shifts in the.

NO staple remover can remove flush stapes (or sunken staples) in hardwoods without some gouging. And this is NOT the tool to use for those, either, as you risk breaking the tip. For those staples, you're better off using a prong-type remover like the Osborne. The Crain will let you get at 90% or more of the staples in a typical job.

How to Remove Carpet Staples from Wood Floors Removing